Acrylic Paint and Brushes

View larger

Spray Primer 400 ml

Name: Spray Primer 400 ml
Brand: Green Stuff World
SKU: 8435646529370ES
Price: 12.99 EUR
Availability: BackOrder

Disponibilidad: ENVÍO EN 8-10 DÍAS*

Manufacturer:: Green Stuff World

Reference:: 8435646529370ES

Código EAN: 8435646529370

By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of 0,10 €.

More info

What is a primer spray?

Primer spray, also known as primer filler spray, is a type of high-density primer used to level, fill imperfections, and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines on 3D prints, and small irregularities on materials such as plastic, resin, metal, wood, and EVA foam.

In cosplay, primer spray is essential for preparing armor and props before the final paint job, ensuring a smooth and uniform surface. It is also used on pieces made with 3D printed PLA, facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.

Thanks to its filling and Smoothed, is an essential product for those seeking professional finishes when creating props, miniatures, repairing cars or motorcycles and their helmets, as well as models and detailed parts in any craft project.

Contents: 1 x 400ml

How to use the primer?

Surface Preparation: The surface must be clean, dry, and free of dust, grease, or residue. If it is smooth or glossy, lightly sand with fine sandpaper (400-600 grit) to improve adhesion.
Product Agitation: Shake the aerosol can well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at a temperature between 10°C and 25°C and with humidity below 1%. 65%. Do not apply in windy, extremely cold, or humid conditions.
Application: Hold the can 15-20 cm away from the object to be primed. Apply in thin, even coats with smooth, constant movements. Wait 5-10 minutes between coats before reapplying.
Drying and Finishing: Touch dry in 30 minutes. Fully dry in 24 hours. For a more even finish, lightly sand before painting.
Cleaning: After use, invert the spray can and press the valve for a few seconds to clean the nozzle.

WARNINGS:

Keep out of reach of children.
Keep away from heat, sparks, open flames, or hot surfaces.
Do not spray on an open flame or other source of ignition.
Do not pierce or burn, even after use.
Keep container tightly closed.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, get medical advice/attention.