Cyanoacrylate Hardener

This cyanoacrylate hardening powder is a specialized product designed by Green Stuff World to improve the filling and bond strength of cyanoacrylate glues, whether in liquid or gel formulations. It is a highly refined powder with a particle size ranging from 45 to 90 microns, which optimizes its strengthening effect.

How to Use Super Glue Hardener

You can follow these steps:

1. Apply the super glue to the desired area where you need to bond or fill.
2. Sprinkle the Bond Enforcing Dust evenly over the cyanoacrylate adhesive. Make sure to completely cover the adhesive area.
3. Let the mixture of cyanoacrylate glue and hardener react for approximately 5 minutes. This time The reaction time may vary depending on the specific adhesive, the amount applied, and finally, the environmental conditions.
4. Once the reaction time has elapsed, you can remove any excess by gently sanding it. This step helps to achieve a smooth and uniform surface.

Optional: If desired, you can also apply this powder directly onto solid surfaces that require reinforcement or filling. Make sure to thoroughly clean the surface before applying the Bond Enforcing Dust.

It is important to note that this powder is not water-soluble, which means it must be stored in a dry environment to maintain its effectiveness. After each use, ensure the container is tightly closed to prevent moisture from entering and compromising the powder.

Additionally, it has been designed to be non-toxic, but it is always good practice to handle any chemical or adhesive-related product with care.

Contents: Bond Enforcing Dust 20g.