NECRON Textured Roller

The textured roller is a practical and precise tool for applying textures to various types of putties, clays, and modeling pastes. It is made of PMMA (transparent acrylic) with a non-stick surface. It is a non-toxic product.

Standard Measurements:

• Length: 14.5 cm (5.5 inches)
• Diameter: 2.5 cm (1 inch)

USAGE GUIDE:

1. Knead the putty or clay until you reach the ideal consistency, always following the manufacturer's instructions.
2. Place the material on the desired base. For a cleaner result, smooth the surface well before applying the texture. You can use a roller without relief to prepare the base.
3. Some materials require you to lightly dampen the roller or use modeling petroleum jelly. This will prevent sticking while you work.
4. Glide the roller slowly, applying even pressure to ensure a smooth finish.
5. Once the material is dry or hardened, trim any excess edges if necessary.
   
   

COMPATIBILITY WITH PUTTIES AND CLAYS:

This type of tool is compatible with most products on the market.

Polymer clays such as Super Sculpey work especially well, as they remain soft until baking, allowing for adjustments during modeling. If working on MDF wood bases, everything can be baked together. Standard baking is 15 minutes at 150°C. The MDF wood may emit a slight toasted smell during this process, but it will not be damaged. damage.

In the case of epoxy putties, such as green stuff, it is important to be aware of their tendency to stick. It is recommended to dampen the roller or use petroleum jelly to facilitate its use. Talcum powder can also be applied as an alternative.

Another recommended option is Milliput putty, which offers good results, although it should be worked without adding too much water, as this can make it difficult to handle. If it is too sticky, simply continue kneading until its texture improves.

*** Careful cleaning is essential after use with these putties to preserve the details of the design engraved on the roller.

MAINTENANCE AND CLEANING:

If any residue remains after use, use the Scratch brushes with water to remove the material embedded in the roller's reliefs.

WARNINGS:

Use of the roller by children without adult supervision is not recommended. adult.

TUTORIAL:

Patent number 002568469