INSTRUCTIONS FOR USE:

- Shake the spray can well before each use.
- Do not apply too much paint in one place to avoid the "eyecat effect". This type of paint should be applied with a left-to-right swinging motion to ensure consistent and even application.
- Keep the spray can at Hold the can at least 20-30 centimeters from the surface you wish to paint. This will ensure the paint is distributed evenly across the entire surface. If you need to access difficult areas, you can get closer, but move the spray paint quickly to avoid pooling and dripping. Do not apply the paint from too far away to avoid a rough surface. If you apply it too close, it may drip. Aerosols contain propellant gas that could damage some plastics if applied too closely. Hold the spray can at a 90° angle during use. Keeping this in mind will ensure the pigments are deposited neatly, creating the correct color-changing effect; otherwise, you may create a dispersed and/or sprayed effect. Clean the nozzle after each use by spraying a small amount of paint with the can completely upside down. This way, only gas will escape, cleaning the air chambers and the nozzle. If the spray can is not cleaned properly after each use, the pigments inside could become contaminated. clogging it, preventing the product from coming out or the gas from escaping completely as if it were being pumped.

WARNINGS:

Keep out of reach of children.
Keep away from heat, sparks, open flames, or hot surfaces.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Keep container tightly closed.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Call a POISON CENTER or a doctor: If eye irritation persists, consult a doctor.