Feldherr MAXI PLUS bag for Star Wars X-Wing: Separatist Alliance

During the Clone Wars, Trident-class ships were considered heirs of doom, as whenever one in Separatist colors was sighted, a larger fighting force was not far behind.

Your The Trident-class assault ship is just the precursor to your fleet, and with more ships, you'll crush any resistance. Ultimately, you will bring peace to the galaxy. So that your ships are not victims of the ravages of time or an unwanted fall, you have the matching Feldherr MAXI PLUS bag, with foam included, for your miniatures. With it, your combat ships can be safely and orderly transported to battle.

The set consists of:

• 1 Feldherr MAXI PLUS bag
• 1 Full-Size foam tray for 1 Trident-class assault ship, 6 fighters, cards and game material (FSMFDX110BO)
• 1 Half-Size foam tray for 1 Slave 1, 6 fighters and game material (HSBQ050BO)
• 1 Half-Size foam tray for cards, bases and tokens (HSMEHN045BO)
• 1 Half-Size foam tray for 10 fighters (HSBE050BO )
• 1 Half-Size foam tray for 1 Sith infiltrator, fighters and game material (HSMEMD035BO)
• 1 Half-Size foam mat, 10 mm, as height compensation
• 1 foam topper

1 Feldherr Full-Size and 4 Feldherr Half-Size foam trays are used to store your Separatist fleet.

< p>With the foam insert FSMFDX110BO, the Kraken ship arrives at the game table with all the tentacles in place, li This to fight epic battles in space, air and water at any time.

The base, along with the Maneuvering Tool, finds a place in the large oblong compartment next to it. The pegs also have their compartment. The tokens, along with the dials and resource tracker, are stored in the square compartment below the ship.

The card compartment, with a finger-wide cutout for easy removal of the deck, it houses the game cards; of course, cards with protective sleeves will also fit.

There are six rectangular compartments left for additional hunting miniatures. These fit here with the base. They are suitable for holding Hyena-class bomber droids, Nantex-class starfighters or Vulture-class droid fighters, for example.

• Each of the 6 compartments is 50mm long x 45 mm wide x 100 mm deep.

The Slave I convinces with excellent armor and enormous flexibility in armament.

In the 50 mm insert high, a compartment is adapted to the miniature of the Slave I model (compatible with both variants, Slave I and Slave I of Jango Fett). If you want to store a second Slave 1, there is a large rectangular compartment available. A second miniature can be found here or the compartment can be used as storage for playing cards and bases.

In addition, there are six smaller compartments to store other model ships. For example, they are ideal for storing medium-sized ships, such as the SRP Droid Gunship, or for small ships, such as the Tridroid Fighter. Bases fit here.

Accessories such as tokens, dials or pegs are also well placed here.

The seven compartments have the following dimensions:

• 2 compartments: 60mm long x 41mm wide x 40mm deep
• 2 compartments: 72mm long x 52mm wide x 40mm deep
• 1 compartment: 95 mm long x 83 mm wide x 40 mm deep
• 1 compartment: 60 mm long x 52 mm wide x 40 mm deep
• 1 compartment: 72 mm long x 42 mm wide x 40 mm deep

Equipped with devastating firepower, a stealth system and advanced technology, the Infiltrator is the perfect ship for clandestine Sith operations.

A miniature-sized compartment provides a secure fit for the Sith Infiltrator in the flatter Half-Size insert. The model fits here both ways, with the wings folded in or out.

In addition, there is one compartment for large bases and two for dials. The dials fit here with and without upgrade. These compartments can also be used to store small bases. The two adjoining compartments can be used to store small bases or to hold small starfighters.

One hexagonal compartment can be filled - as can the other two compartments - with small ship models, such as the Droid Fighter from Vulture class, the Z-95-AF4 Headhunter or the Aethersprite Delta-7.

The 5 freely available slots have the following dimensions

• 1 slot, hexagonal: 48 mm long x 42mm wide x 25mm deep
• 2 compartments: 59mm long x 46mm wide x 25mm deep
• 2 compartments: 46mm long x 37mm wide x 25mm deep

The two half-size bays (59 x 46) also fit the HMP droid cannon.

For additional fighters , the insert with 10 compartments is available. Up to 10 fighters such as the Tie-Fighter, Tie-Phantom, HWK-290 and others can be stored here, including the mounted base.

The 10 compartments have the following dimensions:

< ul>2 compartments: 70mm long x 52mm wide x 40mm deep 4 compartments: 70mm long x 42mm wide x 40mm deep 2 compartments: 70mm long x 42mm wide x 40mm deep, one corner rounded

There is an insert with 8 compartments for additional game material such as bases, spheres, cards and tokens.

The 8 compartments have the following dimensions

• 4 round compartments with a diameter of 52 mm
• 1 compartment: 52 mm long x 22mm wide x 35mm deep
• 1 compartment: 84mm long x 84mm wide x 35mm deep
• 1 compartment: 67mm long x 67 mm wide x 35 mm deep.
• 1 compartment: 97 mm long x 79 mm wide x 35mm deep.

Bespoke compartments ensure your miniatures remain securely stored during transport without the need for retaining bolts. The soft foam reliably protects against broken or bent parts. And the colors of the painted miniatures are safe from scratches and paint abrasion.

The included foam topper ensures that all miniatures are surrounded by foam, and the figures in the top insert do not they will not come off the carpet or rub against the fabric of the bag during transport.

The Feldherr MAXI PLUS bag is made of a particularly resistant material. Padded side panels and a reinforced bottom furthermore ensure that the miniatures are excellently protected against external influences when transported by car or train.

In addition to the large main compartment, the bag features a zippered pocket in the front part. Brochures, the playmat and other small items can be stored in it.

There is an easy-grip carry handle on the top. If you prefer to keep your hands free, you can also carry the bag as a crossbody bag thanks to the sturdy removable shoulder strap.

Dimensions of the MAXI PLUS bag

• Inside: approx. 345mm x 275mm x 220mm
• Exterior: approx. 390mm x 330mm x 230mm

Foam tray dimensions:

• FSMFDX110BO: 345mm x 275mm x 110mm overall height ( 100 mm useful height + 10 mm foam base)
• HSBQ050BO / HSBE050BO: 275 mm x 172 mm x 50 mm total height (40 mm useful height + 10 mm foam base)
• HSMEHN045BO: 275 mm x 172 mm x 45 mm total height (35 mm useful height + 10 mm foam base)
• HSMEMD035BO: 275 mm x 172 mm x 35 mm total height (25 mm usable height + 10 mm foam base)

• fine-pored foam - Made in Germany
• chlorine-free and acid