MEGA Textured Paving Roller

The textured roller is a tool designed to imprint textures on surfaces worked with putties, clays, or modeling pastes. It is made of transparent PMMA, a non-toxic acrylic plastic with non-stick properties that facilitate its use and cleaning.

Approximate Measurements:

• Length: 14.5 cm (5.5")
• Diameter: 2.5 cm (1")
• Stone Size: 4x4 mm

INSTRUCTIONS FOR USE:

1. Knead the putty or clay well until it is ready to work with, according to the product recommendations.
2. Spread the material on the base where you will apply the texture, making sure it is as even as possible as uniform as possible. For best results, it is recommended to smooth the surface beforehand with a smooth roller.
3. Depending on the putty, it is advisable to lightly dampen the roller or apply modeling petroleum jelly to prevent sticking.
4. Roll the roller over the surface, applying constant pressure to achieve a homogeneous effect.
5. Once the material has hardened, carefully remove any excess edges.

COMPATIBILITY WITH DIFFERENT MATERIALS:

This roller can be used with a wide range of materials.

With polymer clays such as Super Sculpey, working is especially convenient, as they are easy to mold and do not harden until baking. To create textured bases, they can be used directly on MDF wood bases, which also bake without issue at 150°C for 15 minutes. MDF wood does not burn, although it can It will give off a slight odor when heated.

If you are working with epoxy putties, there is a wider variety of techniques.

Green putty, for example, tends to stick, so it is recommended to wet the roller or apply a small amount of petroleum jelly for modeling. Talcum powder can also be used to reduce stickiness.

Milliput putty works well, but avoid over-wetting it, as this can make it difficult to handle. If the mixture is too soft, simply continue kneading until its consistency improves.

*** In all these cases, it is essential to clean the rollers thoroughly after use.

MAINTENANCE:

To keep the rollers in good condition, rinse them with water and use Scratch brushes to remove any residue left in the raised areas.

RESPONSIBLE USE:

This product should not be used by children without adult supervision. an adult.

EXAMPLES:

Patent number 002568469